Skip Navigation
Skip to contents

Restor Dent Endod : Restorative Dentistry & Endodontics

OPEN ACCESS

Search

Page Path
HOME > Search
1 "Fateme Razazpour"
Filter
Filter
Article category
Keywords
Publication year
Authors
  • rupiahtoto
  • rupiahtoto
  • rupiahtoto
  • rupiahtoto
  • rupiahtoto
  • rupiahtoto
  • slot deposit pulsa
  • bo slot gacor
  • toto togel
  • slot gacor
  • login rupiahtoto
  • rupiahtoto
  • rupiahtoto
  • rupiahtoto
  • Research Article
    The effect of thermocycling on the degree of conversion and mechanical properties of a microhybrid dental resin composite
    Mehrsima Ghavami-Lahiji, Melika Firouzmanesh, Hossein Bagheri, Tahereh S. Jafarzadeh Kashi, Fateme Razazpour, Marjan Behroozibakhsh
    Restor Dent Endod 2018;43(2):e26.   Published online April 26, 2018
    DOI: https://doi.org/10.5395/rde.2018.43.e26
    AbstractAbstract PDFPubReaderePub
    Objective

    The purpose of this study was to investigate the degree of conversion (DC) and mechanical properties of a microhybrid Filtek Z250 (3M ESPE) resin composite after aging.

    Method

    The specimens were fabricated using circular molds to investigate Vickers microhardness (Vickers hardness number [VHN]) and DC, and were prepared according to ISO 4049 for flexural strength testing. The initial DC (%) of discs was recorded using attenuated total reflectance-Fourier transforming infrared spectroscopy. The initial VHN of the specimens was measured using a microhardness tester under a load of 300 g for 15 seconds and the flexural strength test was carried out with a universal testing machine (crosshead speed, 0.5 mm/min). The specimens were then subjected to thermocycling in 5°C and 55°C water baths. Properties were assessed after 1,000–10,000 cycles of thermocycling. The surfaces were evaluated using scanning electron microscopy (SEM). Data were analyzed using 1-way analysis of variance followed by the Tukey honest significant difference post hoc test.

    Results

    Statistical analysis showed that DC tended to increase up to 4,000 cycles, with no significant changes. VHN and flexural strength values significantly decreased upon thermal cycling when compared to baseline (p < 0.05). However, there was no significant difference between initial and post-thermocycling VHN results at 1,000 cycles. SEM images after aging showed deteriorative changes in the resin composite surfaces.

    Conclusions

    The Z250 microhybrid resin composite showed reduced surface microhardness and flexural strength and increased DC after thermocycling.

    Citations

    Citations to this article as recorded by  
    • Clinical Decision‐Making of Repair vs. Replacement of Defective Direct Dental Restorations: A Multinational Cross‐Sectional Study With Meta‐Analysis
      Ömer Hatipoğlu, João Filipe Brochado Martins, Mohmed Isaqali Karobari, Nessrin Taha, Thiyezen Abdullah Aldhelai, Daoud M. Ayyad, Ahmed A. Madfa, Benjamin Martin‐Biedma, Rafael Fernández‐Grisales, Bakhyt A. Omarova, Wen Yi Lim, Suha Alfirjani, Kacper Nijak
      Journal of Esthetic and Restorative Dentistry.2025; 37(4): 977.     CrossRef
    • An In Vitro Evaluation of Novel Bioactive Liner's Effect on Marginal Adaptation of Class II Composite Restorations: A Scanning Electron Microscope Analysis
      Girija S Sajjan, Naveena Ponnada, Praveen Dalavai, Madhu Varma Kanumuri, Venkata Karteek Varma Penmatsa, B V Sindhuja
      World Journal of Dentistry.2025; 15(9): 749.     CrossRef
    • Different contemporary resin cements for intracanal luting of glass fiber posts - Bonding and polymerization assessments
      Anna Caroliny Detogni, Vitaliano Gomes de Araújo Neto, Caio Felipe de Almeida Nobre, Victor Pinheiro Feitosa, Mário Alexandre Coelho Sinhoreti
      International Journal of Adhesion and Adhesives.2025; 138: 103951.     CrossRef
    • Effect of food-simulating liquids and polishing times on the color stability of microhybrid and nanohybrid resin composites
      Muhammet Fidan, Nevin Çankaya
      Discover Nano.2025;[Epub]     CrossRef
    • Effect of irrigation protocols for post space preparation on the bond of the resin luting agent and post to a hydraulic calcium silicate filled root: An in vitro study
      Nuttanun Poeaim, Sirawut Hiran-us, Yanee Tantilertanant
      The Journal of Prosthetic Dentistry.2025; 133(4): 1039.e1.     CrossRef
    • Influence of Different Adhesives and Surface Treatments on Shear and Tensile Bond Strength and Microleakage with Micro-CT of Repaired Bulk-Fill Composites
      Handan Yıldırım-Işık, Mediha Büyükgöze-Dindar
      Polymers.2025; 17(12): 1680.     CrossRef
    • Effect of thermal ageing on physico-mechanical properties and self-healing potential of experimental 3D-printed denture base resin composites
      Mariam Raza Syed, Amr Fawzy
      Journal of the Mechanical Behavior of Biomedical Materials.2025; 170: 107123.     CrossRef
    • Awareness of possible complications associated with direct composite restorations: A multinational survey among dentists from 13 countries with meta-analysis
      Anna Lehmann, Kacper Nijakowski, Jakub Jankowski, David Donnermeyer, Paulo J. Palma, Milan Drobac, João Filipe Brochado Martins, Fatma Pertek Hatipoğlu, Indira Tulegenova, Muhammad Qasim Javed, Hamad Mohammad Alharkan, Olga Bekjanova, Sylvia Wyzga, Moataz
      Journal of Dentistry.2024; 145: 105009.     CrossRef
    • Comparative evaluation of bond strength and color stability of polyetheretherketone and zirconia layered with indirect composite before and after thermocycling: An in vitro study
      Pooja Singh, Subhabrata Maiti, Amrutha Shenoy
      The Journal of Indian Prosthodontic Society.2024; 24(3): 252.     CrossRef
    • Biaxial flexural strength of hydrothermally aged resin-based materials
      Rodrigo Ricci Vivan, Mariana Miranda de Toledo Piza, Bruna de Mello Silva, Thalya Fernanda Horsth Maltarollo, Gustavo Sivieri-Araujo, Murilo Priori Alcalde, Marco Antonio Hungaro Duarte, Estevam Augusto Bonfante, Henrico Badaoui Strazzi-Sahyon
      Journal of the Mechanical Behavior of Biomedical Materials.2024; 155: 106568.     CrossRef
    • Comparative Strength Study of Indirect Permanent Restorations: 3D-Printed, Milled, and Conventional Dental Composites
      João Paulo Mendes Tribst, Adelheid Veerman, Gabriel Kalil Rocha Pereira, Cornelis Johannes Kleverlaan, Amanda Maria de Oliveira Dal Piva
      Clinics and Practice.2024; 14(5): 1940.     CrossRef
    • Influencia del termociclado sobre la estabilidad del color de dos resinas compuestas //Influence of thermocycling on the color stability of two composite resins
      Verónica Lucía Ventrera, María Eugenia Alejandra Barrionuevo
      Revista de la Asociación Odontológica Argentina.2024; : 1.     CrossRef
    • Efeito do protocolo de polimento e do armazenamento em meio úmido na variação de cor, massa e rugosidade superficial de resinas compostas
      Leonardo Cruz Morais, Mateus Victória Gontijo, Gabriela Rodrigues Pires, Victor de Morais Gomes, Milton Carlos Kuga, Francisco Fernando Massola Filho, Amanda Gonçalves Franco, Alberto Nogueira da Gama Antunes
      Cuadernos de Educación y Desarrollo.2024; 16(6): e4556.     CrossRef
    • A comparison of the mechanical properties of 3D-printed, milled, and conventional denture base resin materials
      Hyeong-Ju YU, You-Jung KANG, Yeseul PARK, Hoon KIM, Jee-Hwan KIM
      Dental Materials Journal.2024; 43(6): 813.     CrossRef
    • Effect of aging and fiber‐reinforcement on color stability, translucency, and microhardness of single‐shade resin composites versus multi‐shade resin composite
      Muhammet Fidan, Özhan Yağci
      Journal of Esthetic and Restorative Dentistry.2024; 36(4): 632.     CrossRef
    • Impact of Artificial Aging on the Physical and Mechanical Characteristics of Denture Base Materials Fabricated via 3D Printing
      Ahmed Altarazi, Julfikar Haider, Abdulaziz Alhotan, Nick Silikas, Hugh Devlin, Weihao Yuan
      International Journal of Biomaterials.2024;[Epub]     CrossRef
    • Synthesis, monomer conversion, and mechanical properties of polylysine based dental composites
      Saadia Bano Lone, Rabia Zeeshan, Hina Khadim, Muhammad Adnan Khan, Abdul Samad Khan, Anila Asif
      Journal of the Mechanical Behavior of Biomedical Materials.2024; 151: 106398.     CrossRef
    • Bond strength and surface roughness assessment of novel antimicrobial polymeric coated dental cement
      Ghada Naguib, Hisham Mously, Jumana Mazhar, Ibrahim Alkanfari, Abdulelah Binmahfooz, Mohammed Zahran, Mohamed T. Hamed
      Discover Nano.2024;[Epub]     CrossRef
    • Evaluation of microhardness, degree of conversion, and abrasion resistance of nanoglass and multiwalled carbon nanotubes reinforced three‐dimensionally printed denture base resins
      Pansai Ashraf Mohamed, Yomna Mohamed Ibrahim, Kenda Ibrahim Hisham Hanno, Mohamed Mahmoud Abdul‐Monem
      Journal of Prosthodontics.2024;[Epub]     CrossRef
    • Effect of CAD-CAM block thickness and translucency on the polymerization of luting materials
      Bengü Doğu Kaya, Selinsu Öztürk, Ayşe Aslı Şenol, Erkut Kahramanoğlu, Pınar Yılmaz Atalı, Bilge Tarçın
      BMC Oral Health.2024;[Epub]     CrossRef
    • Simulation of oral environmental conditions through artificial aging of teeth for the assessment of enamel discoloration in orthodontics
      Celal Irgın
      BMC Oral Health.2024;[Epub]     CrossRef
    • Do universal adhesive systems affect color coordinates and color change of single-shade resin composites compared with a multi-shade composite?
      Muhammet FİDAN, Özhan YAĞCI
      Dental Materials Journal.2023; 42(6): 886.     CrossRef
    • Fabrication, Evaluation, and Performance Ranking of Tri-calcium Phosphate and Silica Reinforced Dental Resin Composite Materials
      Sonu Saini, Anoj Meena, Ramkumar Yadav, Amar Patnaik
      Silicon.2023; 15(18): 8045.     CrossRef
    • Can Modification with Urethane Derivatives or the Addition of an Anti-Hydrolysis Agent Influence the Hydrolytic Stability of Resin Dental Composite?
      Agata Szczesio-Wlodarczyk, Izabela M. Barszczewska-Rybarek, Marta W. Chrószcz-Porębska, Karolina Kopacz, Jerzy Sokolowski, Kinga Bociong
      International Journal of Molecular Sciences.2023; 24(5): 4336.     CrossRef
    • Effect of veneering material type and thickness ratio on flexural strength of bi-layered PEEK restorations before and after thermal cycling
      Ahmed Gouda, Ashraf Sherif, Mennatallah Wahba, Tarek Morsi
      Clinical Oral Investigations.2023; 27(6): 2629.     CrossRef
    • 3D printed denture base material: The effect of incorporating TiO2 nanoparticles and artificial ageing on the physical and mechanical properties
      Ahmed Altarazi, Julfikar Haider, Abdulaziz Alhotan, Nick Silikas, Hugh Devlin
      Dental Materials.2023; 39(12): 1122.     CrossRef
    • Influence of silane coupling agent and aging on the repair bond strength of dental composites
      Gustavo Jusué-Esparza, José Alejandro Rivera-Gonzaga, Guillermo Grazioli, Ana Josefina Monjarás-Ávila, J. Eliezer Zamarripa-Calderón, Carlos Enrique Cuevas-Suárez
      Journal of Adhesion Science and Technology.2023; 37(5): 913.     CrossRef
    • Degree of conversion of light‐polymerized composite resin in implant prosthesis screw access opening
      Se‐Hyun Park, Yoon‐Hyuk Huh, Chan‐Jin Park, Lee‐Ra Cho, Kyung‐Ho Ko
      Journal of Prosthodontics.2023; 32(9): 829.     CrossRef
    • Investigation of the effect of matrix-interface formed with silane-based coupling agents on physico-chemical behavior and flow distance of dental composites
      Zerin Yeşil Acar, Merve Tunç Koçyiğit, Meltem Asiltürk
      Journal of Molecular Liquids.2023; 378: 121600.     CrossRef
    • Evaluation of Water Sorption and Solubility of 3D-Printed, CAD/CAM Milled, and PMMA Denture Base Materials Subjected to Artificial Aging
      Mariya Dimitrova, Angelina Vlahova, Ilian Hristov, Rada Kazakova, Bozhana Chuchulska, Stoyan Kazakov, Marta Forte, Vanja Granberg, Giuseppe Barile, Saverio Capodiferro, Massimo Corsalini
      Journal of Composites Science.2023; 7(8): 339.     CrossRef
    • Effect of thermocycling on internal microhardness of high and low viscosity bulk fill composite resins in class I cavities
      Sâmara Luciana de Andrade LIMA, Lais Lemos CABRAL, Natália Russo CARLOS, Saulo André de Andrade LIMA, Kamila Rosamilia KANTOVITZ, Flávia Lucisano Botelho do AMARAL
      RGO - Revista Gaúcha de Odontologia.2023;[Epub]     CrossRef
    • Effects of an Acidic Environment on the Strength and Chemical Changes of Resin-based Composites
      S Kang, B-H Cho
      Operative Dentistry.2023; 48(4): E81.     CrossRef
    • Influence of compressive forces and aging through thermocycling on the strength of mono incremental dental composite resins
      Cristian Roberto Sigcho Romero, Henry Fabricio Mejía Mosquera, Sandra Marcela Quisiguiña Guevara, Yudy Jacqueline Alvarado Aguayo
      Bionatura.2023; 8(4): 1.     CrossRef
    • Push-out Bond Strength of Two Fiber Posts in Composite Resin Using Different Types of Silanization
      RM Novis, BLT Leon, FMG França, CP Turssi, RT Basting, FLB Amaral
      Operative Dentistry.2022; 47(2): 173.     CrossRef
    • Penetration and Adaptation of the Highly Viscous Zinc-Reinforced Glass Ionomer Cement on Contaminated Fissures: An In Vitro Study with SEM Analysis
      Galiah AlJefri, Sunil Kotha, Muhannad Murad, Reham Aljudaibi, Fatmah Almotawah, Sreekanth Mallineni
      International Journal of Environmental Research and Public Health.2022; 19(10): 6291.     CrossRef
    • Surface Characteristics and Color Stability of Dental PEEK Related to Water Saturation and Thermal Cycling
      Liliana Porojan, Flavia Roxana Toma, Mihaela Ionela Bîrdeanu, Roxana Diana Vasiliu, Ion-Dragoș Uțu, Anamaria Matichescu
      Polymers.2022; 14(11): 2144.     CrossRef
    • Effects of aging and light-curing unit type on the volume and internal porosity of bulk-fill resin composite restoration
      Afnan O. Al-Zain, Elaf A. Alboloshi, Walaa A. Amir, Maryam A. Alghilan, Eliseu A. Münchow
      The Saudi Dental Journal.2022; 34(3): 243.     CrossRef
    • An Evaluation of the Hydrolytic Stability of Selected Experimental Dental Matrices and Composites
      Agata Szczesio-Wlodarczyk, Karolina Kopacz, Malgorzata Iwona Szynkowska-Jozwik, Jerzy Sokolowski, Kinga Bociong
      Materials.2022; 15(14): 5055.     CrossRef
    • Comparison of the Mechanical Properties and Push-out Bond Strength of Self-adhesive and Conventional Resin Cements on Fiber Post Cementation
      MR Santi, RBE Lins, BO Sahadi, JR Soto-Montero, LRM Martins
      Operative Dentistry.2022; 47(3): 346.     CrossRef
    • Effect of Different Polymerization Times on Color Change, Translucency Parameter, and Surface Hardness of Bulk-Fill Resin Composites
      HY Gonder, M Fidan
      Nigerian Journal of Clinical Practice.2022; 25(10): 1751.     CrossRef
    • Surface degradation and biofilm formation on hybrid and nanohybrid composites after immersion in different liquids
      Gabriela Escamilla-Gómez, Octavio Sánchez-Vargas, Diana M. Escobar-García, Amaury Pozos-Guillén, Norma V. Zavala-Alonso, Mariana Gutiérrez-Sánchez, José E. Pérez-López, Gregorio Sánchez-Balderas, Gabriel F. Romo-Ramírez, Marine Ortiz-Magdaleno
      Journal of Oral Science.2022; 64(4): 263.     CrossRef
    • Effects of Different Adhesive Systems and Orthodontic Bracket Material on Enamel Surface Discoloration: An In Vitro Study
      Ali Alqerban, Doaa R. M. Ahmed, Ali S. Aljhani, Dalal Almadhi, Amjad AlShahrani, Hussah AlAdwene, Abdulaziz Samran
      Applied Sciences.2022; 12(24): 12885.     CrossRef
    • Effects of Immediate Coating on Unset Composite with Different Bonding Agents to Surface Hardness
      Nantawan Krajangta, Supissara Ninbanjong, Sunisa Khosook, Kanjana Chaitontuak, Awiruth Klaisiri
      European Journal of Dentistry.2022; 16(04): 828.     CrossRef
    • Rational durability of optical properties of chameleon effect of Omnichroma and Essentia composite thermocycled in black dark drinks (in vitro study)
      Bassma Abdelhamed, Asmaa Abdel-Hakeem Metwally, Heba A. Shalaby
      Bulletin of the National Research Centre.2022;[Epub]     CrossRef
    • Comparative Evaluation of Shear Bond Strength of Nanohybrid Composite Restoration After the Placement of Flowable Compomer and Composite Using the Snowplow Technique
      Meghna Dugar, Anuja Ikhar, Pradnya Nikhade, Manoj Chandak, Nidhi Motwani
      Cureus.2022;[Epub]     CrossRef
    • The First Step in Standardizing an Artificial Aging Protocol for Dental Composites—Evaluation of Basic Protocols
      Agata Szczesio-Wlodarczyk, Magdalena Fronczek, Katarzyna Ranoszek-Soliwoda, Jarosław Grobelny, Jerzy Sokolowski, Kinga Bociong
      Molecules.2022; 27(11): 3511.     CrossRef
    • Effect of Different Surface Treatments on the Long‐Term Repair Bond Strength of Aged Methacrylate‐Based Resin Composite Restorations: A Systematic Review and Network Meta‐analysis
      Mahdi Hadilou, Amirmohammad Dolatabadi, Morteza Ghojazadeh, Hossein Hosseinifard, Parnian Alizadeh Oskuee, Fatemeh Pournaghi Azar, Victor Feitosa
      BioMed Research International.2022;[Epub]     CrossRef
    • Edge chipping resistance of veneering composite resins
      Parissa Nassary Zadeh, Bogna Stawarczyk, Rüdiger Hampe, Anja Liebermann, Felicitas Mayinger
      Journal of the Mechanical Behavior of Biomedical Materials.2021; 116: 104349.     CrossRef
    • The effect of radiation exposure and storage time on the degree of conversion and flexural strength of different resin composites
      Ragia M. Taher, Lamiaa M. Moharam, Amin E. Amin, Mohamed H. Zaazou, Farid S. El-Askary, Mokhtar N. Ibrahim
      Bulletin of the National Research Centre.2021;[Epub]     CrossRef
    • Fracture Load of CAD/CAM Fabricated Cantilever Implant-Supported Zirconia Framework: An In Vitro Study
      Ibraheem F. Alshiddi, Syed Rashid Habib, Muhammad Sohail Zafar, Salwa Bajunaid, Nawaf Labban, Mohammed Alsarhan
      Molecules.2021; 26(8): 2259.     CrossRef
    • A numerical, theoretical and experimental study of the effect of thermocycling on the matrix-filler interface of dental restorative materials
      Yoan Boussès, Nathalie Brulat-Bouchard, Pierre-Olivier Bouchard, Yannick Tillier
      Dental Materials.2021; 37(5): 772.     CrossRef
    • Impact of polymerization and storage on the degree of conversion and mechanical properties of veneering resin composites
      Felicitas MAYINGER, Marcel REYMUS, Anja LIEBERMANN, Marc RICHTER, Patrick KUBRYK, Henning GROẞEKAPPENBERG, Bogna STAWARCZYK
      Dental Materials Journal.2021; 40(2): 487.     CrossRef
    • Intrapulpal Concentration of Hydrogen Peroxide of Teeth Restored With Bulk Fill and Conventional Bioactive Composites
      DP Silva, BA Resende, M Kury, CB André, CPM Tabchoury, M Giannini, V Cavalli
      Operative Dentistry.2021; 46(3): E158.     CrossRef
    • Silane content influences physicochemical properties in nanostructured model composites
      Larissa Maria Cavalcante, Lucielle Guimarães Ferraz, Karinne Bueno Antunes, Isadora Martini Garcia, Luis Felipe Jochims Schneider, Fabrício Mezzomo Collares
      Dental Materials.2021; 37(2): e85.     CrossRef
    • AĞIZ GARGARALARI VE ANTİSEPTİKLERİNİN FARKLI KOMPOZİT REZİNLERİN RENK STABİLİTESİNE ETKİSİ
      Turan Emre KUZU, Özcan KARATAŞ
      Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi.2021; : 1.     CrossRef
    • Evaluation of Immediate and Delayed Microleakage of Class V Cavities Restored with Chitosan-incorporated Composite Resins: An In Vitro Study
      Roopa R Nadig, Veena Pai, Arpita Deb
      International Journal of Clinical Pediatric Dentistry.2021; 14(5): 621.     CrossRef
    • Influence of Diode Laser for the Treatment of Dentin Hypersensitivity on Microleakage of Cervical Restorations
      Doaa R. M. Ahmed, Diana G. Shaath, Jomana B. Alakeel, Abdulaziz A. Samran, Mona Abbassy
      BioMed Research International.2021;[Epub]     CrossRef
    • Ageing of Dental Composites Based on Methacrylate Resins—A Critical Review of the Causes and Method of Assessment
      Agata Szczesio-Wlodarczyk, Jerzy Sokolowski, Joanna Kleczewska, Kinga Bociong
      Polymers.2020; 12(4): 882.     CrossRef
    • Flexural strength and surface microhardness of materials used for temporary dental disocclusion submitted to thermal cycling: An in vitro study
      Tamires Borges de Lima, José Guilherme Neves, Ana Paula Terossi de Godoi, Ana Rosa Costa, Viviane Veroni Degan, Américo Bortolazzo Correr, Heloisa Cristina Valdrighi
      International Orthodontics.2020; 18(3): 519.     CrossRef
    • Evaluation of the repair capacities and color stabilities of a resin nanoceramic and hybrid CAD/CAM blocks
      Hasibe Sevilay Bahadır, Yusuf Bayraktar
      The Journal of Advanced Prosthodontics.2020; 12(3): 140.     CrossRef
    • Effect of Different Surface Treatments of Resin Relined Fiber Posts Cemented With Self-adhesive Resin Cement on Push-out and Microtensile Bond Strength Tests
      RV Machry, PE Fontana, TC Bohrer, LF Valandro, OB Kaizer
      Operative Dentistry.2020; 45(4): E185.     CrossRef
    • Influences of Successive Exposure to Bleaching and Fluoride Preparations on the Surface Hardness and Roughness of the Aged Resin Composite Restoratives
      Khalid M. Abdelaziz, Shugufta Mir, Shafait Ullah Khateeb, Suheel M. Baba, Saud S. Alshahrani, Eman A. Alshahrani, Zahra A. Alsafi
      Medicina.2020; 56(9): 476.     CrossRef
    • Fracture Resistance of Lithıum Disilicate, Indirect Resin Composite and Zirconıa by Using Dual Cure Resin Cements
      Mohammed BADWAN, Erkut KAHRAMANOĞLU
      Clinical and Experimental Health Sciences.2020; 10(4): 435.     CrossRef
    • Effect of Stress-decreasing Resin Thickness as an Intermediate Layer on Fracture Resistance of Class II Composite Restoration: An In Vitro Study
      Dennis Dennis, Arwin Leonardy, Trimurni Abidin
      World Journal of Dentistry.2020; 11(2): 91.     CrossRef
    • Effect of Thermocycling on Biaxial Flexural Strength of CAD/CAM, Bulk Fill, and Conventional Resin Composite Materials
      EB Benalcázar Jalkh, CM Machado, M Gianinni, I Beltramini, MMT Piza, PG Coelho, R Hirata, EA Bonfante
      Operative Dentistry.2019; 44(5): E254.     CrossRef
    • Mechanical properties of hybrid computer-aided design/computer-aided manufacturing (CAD/CAM) materials after aging treatments
      Hae-Yong Jeong, Hae-Hyoung Lee, Yu-Sung Choi
      Ceramics International.2018; 44(16): 19217.     CrossRef
    • 1,254 View
    • 16 Download
    • 66 Crossref
    Close layer

    Restor Dent Endod : Restorative Dentistry & Endodontics
    Close layer
    TOP